MonoToStereo¶
Note
Starting from AviSynth v2.5 MonoToStereo is replaced by
MergeChannels. MonoToStereo is simply mapped to
MergeChannels.
MonoToStereo converts two mono signals to one stereo signal. This can be used, if one or both channels has been modified separately, and then has to be recombined.
The sample rate of the two clips need to be the same (use ResampleAudio if this is a problem). If either of the sources are in stereo, the signal will be taken from the corresponding channel (left channel from the left_channel_clip, and vice versa for the right channel).
Syntax and Parameters¶
MonoToStereo (left_channel_clip, right_channel_clip)
- clip
Source clip; the left channel will be taken from the first clip.
- clip
Source clip; the right channel will be taken from the second clip.
Example¶
Combines two separate wav sources to a stereo signal:
left_channel = WavSource("c:\left_channel.wav")
right_channel = WavSource("c:\right_channel.wav")
return MonoToStereo(left_channel, right_channel)
$Date: 2022/02/05 21:28:07 $
